> jenk.com.au/free/tv // freebie

Take the ads and tracking off your own TV

A developer gave Claude Code the model number of his parents' TV. It found the TV on the Wi-Fi, switched off the junk apps and built a clean home screen. His project is now the one most people use. Here are its steps in plain words: which TVs it works on, what to do, and how to put it all back.

the 3 steps

1. TVturn on developer mode and debugging, write down the TV's address

2. Computerdownload the project, open Claude Code in it, paste the prompt

3. Follow alongpress Allow on the TV, answer its questions, then turn debugging off

00Does it work on your TV?

01What you need

02On the TV: developer mode on, address written down

Android TV or Google TV: Settings, Device Preferences, About, then press OK on Build seven times. It says "You are now a developer!". Go back one screen, open Developer options and turn on USB debugging. If there's a Network debugging or ADB debugging switch as well, turn that on too.

Fire TV: Settings, My Fire TV, About, then press OK on the device name seven times. Go back, open Developer Options and turn on ADB debugging.

Then find the TV's address: Settings, Network, pick your Wi-Fi, and look for IP address (on Fire TV it's under My Fire TV, About, Network). It looks like 192.168.1.50. Write it down.

03On your computer: get the project, start Claude, paste the prompt

Open a terminal (Terminal on a Mac, PowerShell on Windows) and paste these three lines one at a time. The first downloads the project, the second goes into its folder, the third starts Claude Code there.

Android TV or Google TV

git clone https://github.com/Gathin23/cleanyourtv
cd cleanyourtv
claude

Now paste this into Claude, with your own TV model and address filled in. It tells Claude to use the project's own prompt and tools, which is what keeps the backup and the undo working.

paste into Claude

Read PROMPT.md in this folder and follow it step by step. My TV model is MODEL HERE and its address is 192.168.1.50. Use this repo's own tools (tools/disable.sh and launcher/build-and-install.sh), don't write your own. Back up first, ask me before you switch off anything I might use, and switch things off in small batches so we can check the TV still works after each one.

Got a Fire TV? Same idea, different project:

Fire TV

git clone https://github.com/humblemuzzu/dumbtv
cd dumbtv
claude

paste into Claude

Clean up my Fire TV. Its IP address is 192.168.1.50. Read AGENTS.md in this folder and use the project's own scripts. Ask me before each step.

Don't have git? Ask Claude to install it, or download the project as a zip from the GitHub page (the green Code button) and open Claude in the unzipped folder.

04Follow along

The TV will pop up "Allow USB debugging?". Press Allow. Claude then asks a few questions: which apps you actually use, whether to keep the voice assistant and casting, and whether to leave updates on. Answer them honestly, it only switches off what you don't name.

Then it backs up the TV's current state, switches the junk off, installs a small home screen (the one that looks like an Apple TV) and checks each step with screenshots pulled from the TV. If it asks you to confirm something you don't understand, ask it to explain in plain words before you say yes.

05When it's done: turn debugging off

This part matters. While network debugging is on, the TV accepts commands from anything on your Wi-Fi, unencrypted. The new home screen keeps working without it.

On the TV: Developer options, then turn off USB debugging, Network debugging and Wireless debugging, whichever ones your TV has, and tap Revoke USB debugging authorisations. Restart the TV. Then ask Claude to confirm the door is shut:

paste into Claude

I've turned debugging off and restarted the TV. Run tools/adb-closed.py against the TV's address and tell me whether the port is closed.

06How to undo it

Nothing gets deleted. The apps are switched off the same way as Settings, Apps, Disable, and the project writes down what the TV looked like before it touched anything. One line puts it back. Easiest is to ask Claude:

paste into Claude

Put my TV back the way it was. Use tools/restore.sh with the list we applied, and give Home back to the original launcher.

On a Fire TV with dumbtv, it's ./scripts/restore.sh. No computer handy? The TV's own Settings, Apps page can switch any app back on.

A firmware update puts the junk back and hands Home to the old launcher. Turn debugging on again, open Claude in the project folder and ask it to run tools/check.py on the list you applied, with --fix. Then turn debugging off again.

The catch

Where this comes from

Got this from a reel? Every reel on @jenkk.ai ends with a word to comment, and the next freebie is on its way.

Follow @jenkk.ai